GERMA Universal Wireless Remote Control Switch

Description

GERMA Universal Wireless Remote Control Switch DC 12V 1CH Relay Receiver Module RF Transmitter 433Mhz Smart Home Remote Controls


Specifications Of The Remote Control:

Model Number: KT08-4

Operating RF Frequency: 433MHz.

Coded System: 1527 Learning Code.

Working Voltage: DC 3V.

Working Current:

Technical Data Of Receiver:

Model Number:KR1201A

Input voltage: 12V

Working current: 10A

Maximum load power: 110W

Frequency: 433Mhz

Support encoding format: EV1527

Wiring method: NC COM NO

Working mode: Momentary, Toggle, Latching Time delay (5s ,10s ,15s )

Wiring diagram :

+V : 12V + input ;

• V: 12V – input ;

NO: Output , normal open;

COM:Output , common ;

NC: Output , normal close.

About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.

Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .

Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.

Clearing the code :

Push the learning button on the receivers for 8 times , the codes will be cleaned;
After clearing the code, all the remote control cannot work any more.

Operating Instrution :

Learning the code :(momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code 🙁 Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A .
LED flash for 5 times .
Push the remote button B .
Led flash for 5 times .
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF .
Learning the code 🙁 Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds .
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again , learning successfully .

Note:

the system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .